Many building owners have likely already put money into these systems, and we are currently installing them on some of our projects.\u00a0 And, it\u2019s completely understandable as to why.<\/p>\n
The marketing behind these products is compelling: install a device at reasonable marginal cost, flip a switch, and get instant air purification removing viruses, bacteria, and other unwanted contaminants. Applicable in both new construction and existing buildings. Allows for cleaner air without the same energy penalty of increased outdoor air introduction. Win-win-win, right?<\/p>\n
However, as much as we really<\/em> want these devices to be the perfect solution (and maybe someday they will be), we are currently seeing a variety of sources questioning the effectiveness of electronic air purification applications. Some of the biggest issues with these technologies claimed by their opponents include:<\/p>\n The airplane manufacturer Boeing just released a 20-page report<\/a> evaluating the effectiveness of ionization technologies tested in an airplane environment. The results? Ionization was proven to be not effective, didn\u2019t meet manufacturers\u2019 claims, and produced unwanted ozone. This open letter<\/a> from health and building industry professionals also advocates against the adoption of the technology until we have more information. This letter was written specifically to caution school districts from using any of the $176 Billion of COVID relief funds for K-12 schools on what they describe as unproven and potentially harmful technology. The Education Department<\/a> is even currently drafting new guidance on these \u201celectronic air cleaning devices that are scientifically unproven and could produce harmful chemical byproducts.\u201d<\/p>\n Ultimately, we want ionization technologies to be a go-to solution, and we will continue to monitor the research and progress in this space. But, for the moment, we recommend staying away from them\u2014especially because there are other solutions that we know work well.<\/p>\n As a side note, if you have concerns about electronic air purification, almost all air purifiers you can buy off the internet will come with this technology installed, oftentimes disguised under some proprietary marketing name. If you\u2019re going to buy an air purifier, make sure you\u2019re purchasing one that does the cleaning just by passing through a HEPA filter, and not additional technologies if you don\u2019t want the ionization component.<\/p>\n In the summer of 2020, ASHRAE released a review<\/a> of how efficient air filters are at capturing viruses, and how much they decrease air flow pressure downstream of the filter.\u00a0What did they find? MERV 13 filters (MERV = minimum efficiency rating values for air filters) are incredibly effective\u201489% on average for a single passthrough\u2014at filtering particles down to 0.3 microns.\u00a0That\u2019s very close to the effectiveness of an N95 mask.\u00a0Virus particles go down to .1 microns or slightly smaller, but they hitch rides on larger particles that get snagged by filtration equipment.\u00a0So, making sure you have good filtration is not only very important, but also very effective, both from a cost and efficiency point of view.<\/p>\n And, what about the dreaded \u201cpressure drop\u201d of suppressing downstream airflow when passing it through a thicker filter media?\u00a0The ASHRAE study showed an average pressure drop at MERV 13 comparable to lower MERV-rated air filters, which don\u2019t have the same efficiency at viral capture. So, perhaps we should look at the viability of upgrading to MERV 13 in existing buildings more closely.<\/p>\n As an added precaution (especially in classrooms or office spaces), you can purchase a portable HEPA filter. It is important to note that when purchasing a HEPA filter, you have to pay attention to the CADR (Clean Air Delivery Rate); use that value and add it to the air change calculations.<\/p>\n Here\u2019s a fun fact: ASHRAE, the industry group responsible for setting ventilation standards, created their threshold for \u201cacceptable\u201d indoor air quality based on the amount of ventilation air needed to control for body odors. Essentially, how much air would you need so that you don\u2019t smell your co-worker?<\/p>\n That, unsurprisingly, does not necessarily equal a healthy indoor air environment. And, while increasing the amount of outdoor air introduced into a space might mean additional energy is used, in new construction, the Passive House model of continuous, balanced ventilation circulating through an energy recovery system allows us to have the best of both worlds: energy efficiency and healthy indoor air quality.<\/p>\n Retrofitting an energy recovery system into an existing building can be much more challenging than new construction. The solutions in retrofits, even in climates with large seasonal swings, may still present many opportunities throughout the year where additional ventilation can be brought into the building without extensive energy penalties (at night, during shoulder seasons, etc.).<\/p>\n In March of 2021, the World Health Organization released a report<\/a>, \u201cRoadmap to improve and ensure good indoor ventilation in the context of COVID-19\u201d that may be helpful. Individual building strategies on ventilation air may vary slightly whether the overall goal is general healthy indoor air quality versus infection control, but many of the concepts will have overlap.<\/p>\n Monitoring can fall into two related buckets: the monitoring of your systems and maintenance schedules to ensure building systems are operating as expected, and monitoring indoor conditions with an indoor air quality sensor.<\/p>\n When it comes to monitoring your building systems and maintenance schedules, this is absolutely critical and should be priority #1. Making sure outdoor air dampers are properly functioning, air filters are being replaced according to schedule, and systems are not malfunctioning in a way that would compromise indoor air quality are the lowest hanging fruit there is. Even the best designed system can deliver poor indoor air quality if it isn\u2019t functioning properly.<\/p>\n For air quality monitoring, there is a certification program called RESET<\/a> which focuses exclusively on indoor air quality (and was around pre-COVID), which can be helpful for guidance and how to deploy monitoring. They also have approved hardware lists<\/a> that anyone can view. These devices do not need to be integrated into the building management system (BMS) to still provide a tremendous amount of value, and even devices that are as cheap as $150 can monitor temperature, relative humidity, carbon dioxide, particulate matter, and volatile organic compounds in the air with a great deal of accuracy.<\/p>\n Other Thoughts In areas that are high risk and\/or difficult to retrofit, distributed air purification devices can be a simple solution to consider. If you are going to go with air purification and monitoring devices, make sure that you buy from reputable brands that are likely to be around in five years. Otherwise, you might get stuck with purification devices for which you cannot find replacement filters, or air monitoring devices with software that is no longer functional. And again, take care to ensure that the air purification device does not contain ionization technology.<\/p>\n The options are seemingly endless as more and more companies are jumping on the ionization technology buzzword train. With the world re-opening and people going back to their pre-pandemic routines, let\u2019s keep it simple\u2014make sure your building systems are monitored and operating properly; open windows whenever conditions are suitable; and use MERV 13 filters.<\/p>\n Steven Burke, LEED & WELL Faculty, Director of Sustainability<\/strong><\/span> <\/p>\n <\/p>\n","protected":false},"excerpt":{"rendered":" Written By: Steven Burke, LEED & WELL Faculty, Director of Sustainability The global Coronavirus pandemic has undoubtedly caused us to rethink indoor environments. At this point, the average person understands that viral transmission happens through breathing contaminated indoor air. And\u00a0if they\u2019re spending a significant amount of time indoors, they probably<\/p>\n","protected":false},"author":2,"featured_media":14037,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"om_disable_all_campaigns":false,"inline_featured_image":false,"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"_uf_show_specific_survey":0,"_uf_disable_surveys":false,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[2],"tags":[84],"class_list":["post-13982","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-insights","tag-sustainability"],"acf":[],"aioseo_notices":[],"yoast_head":"\n\n
Here’s what we can recommend: Filtration, Ventilation & Monitoring<\/span><\/h4>\n
Filtration<\/strong><\/h4>\n
Ventilation<\/strong><\/h4>\n
![\"\"](\"https:\/\/www.consigli.com\/wp-content\/uploads\/2021\/05\/Call-outs-1.jpg\")
<\/p>\nMonitoring<\/strong><\/h4>\n
![\"\"](\"https:\/\/www.consigli.com\/wp-content\/uploads\/2021\/05\/Call-outs-2.jpg\")
<\/p>\n![\"\"](\"https:\/\/www.consigli.com\/wp-content\/uploads\/2021\/05\/Call-outs-3.jpg\")
<\/p>\n
\n<\/strong>If you want to get your entire space certified as healthy or safe in some capacity, there are programs out there. The WELL Building standard has created the WELL Health-Safety Rating<\/a>; Fitwel has created a Viral Response Module<\/a>; and UL is offering a Verified Healthy Building<\/a>, program to name a few.<\/p>\n
\n![\"\"](\"https:\/\/www.consigli.com\/wp-content\/uploads\/2020\/11\/Steven-Burke-150x150.jpg\")
\nAs one of only two professionals to hold Certified Passive House Consultant (CPHC), LEED and WELL Faculty designations, Steven spearheads Consigli\u2019s sustainability programs at the corporate, departmental and project levels. He is responsible for establishing metrics for sustainability reporting, providing training and guidance for Consigli\u2019s staff and consultants, and collaborating with teams to integrate advanced energy and net zero strategies into projects through his involvement in Consigli\u2019s energy division, Arch Energy.<\/span><\/p>\n